[dcplaya]

jmcguire525, on 03 August 2012 - 07:59 AM, said:

What are you using for steering wheel controls? If your car stereo can take optical input you can use Advantage Micro 2 to get a digital optical out of the N7

Well my idea may have run into a huge issue. I need to be able to use USB OTG and charge the tablet at the same time. I dont think thats possible currently.

My idea for the steering wheel controls were to use a Arduino and the AOA 2.0 spec to emulate a USB HID device. But I recently found a device called the JoyCon that does exactly that and is really easy to set up. I have ordered one and am waiting for it to get to my house.

I havent found any car amp that will accept an optical input. I either need a DAC that does RCA or use the 3.5mm and run it through an equalizer

Edited by dcplaya, 03 August 2012 - 09:06 AM.

[jmcguire525]

I don't think there is a way to charge and use OTG, that is why google is using its own way of doing usb audio which will allow charging. You have two options, wait for a DAC that works with google's usb audio similar to the Gear4 dock or make your own DIY OTG cable that has a switch to go from OTG to normal usb as seen in this video... For now I think I will make a switch and flip it over to charge when I'm not in the car, just hope I don't kill my car battery doing this

[arefx]

I installed this but now I'm stuck in a bootloop? how can i fix this im afraid if the battery dies it may not be able to register a charge from the kernel?

[lowens]

arefx, on 05 August 2012 - 03:29 PM, said:

I installed this but now I'm stuck in a bootloop? how can i fix this im afraid if the battery dies it may not be able to register a charge from the kernel?

Reboot into recovery and flash back to your backup try pushing both volume up and down and power should force a reboot and then power and volume down I think ...lol

[joltman]

dcplaya, on 03 August 2012 - 09:04 AM, said:

Well my idea may have run into a huge issue. I need to be able to use USB OTG and charge the tablet at the same time. I dont think thats possible currently.

My idea for the steering wheel controls were to use a Arduino and the AOA 2.0 spec to emulate a USB HID device. But I recently found a device called the JoyCon that does exactly that and is really easy to set up. I have ordered one and am waiting for it to get to my house.

I havent found any car amp that will accept an optical input. I either need a DAC that does RCA or use the 3.5mm and run it through an equalizer

I am not sure, but hopefully the Nexus 7 conforms to the http://www.usb.org/d...harging_1.2.pdf USB Charging Spec 1.1 or 1.2. Look at Section 6. This defines a Accessory Charging Adapter. Basically, you can charge the device while still leaving it in USB Host Mode.

[pcm2a]

Bots, on 30 July 2012 - 03:12 PM, said:

Thanks man. If it helps you identify the problem easier, it actually booted once, but there were repeating FC's all over the place, I couldn't even unlock the device because force closes were piling up everywhere. The two that I remember were phone and systemUI I think. Didn't think to grab a logcat =( After I rebooted I got stuck at boot logo and had to flash a different kernel.

I get the exact same problem with this kernel. I can't even get back into cwr from the bootloader. I have even tried reflashing the recovery but it is still a no go. For the moment I got a nice paperweight...

Update: For more information, When I pick recovery I just get the Google logo and it never moves past that.

Edited by pcm2a, 08 August 2012 - 04:15 AM.

[Bender]

Can anyone tell me how to use 3G USB dongle to use internet outside the wi-fi zone?

[nhat]

pcm2a, on 08 August 2012 - 04:10 AM, said:

I get the exact same problem with this kernel. I can't even get back into cwr from the bootloader. I have even tried reflashing the recovery but it is still a no go. For the moment I got a nice paperweight...

Update: For more information, When I pick recovery I just get the Google logo and it never moves past that.

Hop on http://chat.andirc.net and join #n7 for help

As for this kernel, I've flashed each iteration without issue on the stock rom.

Edited by nhat, 09 August 2012 - 04:15 PM.

[ashclepdia]

pcm2a, on 08 August 2012 - 04:10 AM, said:

I get the exact same problem with this kernel. I can't even get back into cwr from the bootloader. I have even tried reflashing the recovery but it is still a no go. For the moment I got a nice paperweight...

Update: For more information, When I pick recovery I just get the Google logo and it never moves past that.

I had this issue(not flashed this kernel tho) yesterday.
I did:
fastboot erase recovery
fastboot flash recovery
Boots just fine thru the bootloader to recovery now :)


Edit...
WOW...can u tell I'm late to the game? Lmao

Edited by ashclepdia, 28 August 2012 - 04:10 AM.

[goebish]

Hi,

Thank you so much poitee !
I bought a Nexus 7 mainly for this kernel and its USB Audio capability (to use with an iBasso D10 DAC/amp), and it works :)
Still have to reboot to switch between DAC and internal speaker but this is not a big issue.
I also tried cifs, usb hub and usb stick mount, everything works perfectly.

I'd like to donate a few buck$, but the link on the first page doesn't work.

Anyone aware of a kernel / firmware that has the same USB audio capability for Galaxy S2 ?

Edited by goebish, 01 September 2012 - 10:54 AM.