Android OS Forum banner

[Kernel]LGE FR/GB[2.6.32.9](005/013_r2) OC~1.55GHz/UV/SLQB/BFQ/EXT4/Voodoo[Aug-26]

44K views 170 replies 50 participants last post by  bigdig 
#1 · (Edited by Moderator)
Here's an official build of a kernel based on LGE Stock FROYO/GINGERBREAD source code with original FakeShmoo UV/OC hack by Cpasjuste, cleaned up and modified by me


Compatible with: Rooted Stock, Debloated Stock, EaglesBlood, Ultimate G2x and Light/Dark Sinister, Weapon X FROYO and GINGERBREAD ROMs :D Enjoy!


I have patched in BFQ I/O scheduler and SLQB memory allocator for better I/O and memory performance. (LGE's own makefile is a MAJOR FAIL
)​

THIS IS ONLY FOR THOSE WHO ARE WILLING to BETA TEST THIS ON THEIR OWN PHONE... IF YOU ARE NOT COMFORTABLE WITH THIS YOU SHOULD NOT FLASH THIS.

[ Files: ]

[ FROYO: ]

[ Start @ 1.1 GHz, Under Volt, Max @ 1.5 GHz ]
The File ==> LGE Pre-OC/UV Kernel Version 0.0.5 <==
The File ==> LGE Pre-OC/UV Kernel Version 0.0.5 With EXT4 <==

[ Start @ 1.0 GHz, Stock Voltage, Max @ 1.4 GHz ]
The File ==> LGE Stock Voltage Kernel Version 0.0.5 <==
The File ==> LGE Stock Voltage Kernel Version 0.0.5 With EXT4 <==

[ GINGERBREAD: ]

[ Start @ 1.1 GHz, Pre Overclock / Under Volt, Max @ 1.55 GHz ]
The File ==> LGE Pre-OC/UV Kernel Version 013 With EXT4 <==

Pre-OC/UV kernels are NOT supported. If you run into bugs or issues with this version of kernel I will not respond due to nature of OC and UV. If you want support or believe there's a bug with my kernels, use the SV version below and submit dmesg or /proc/last_kmsg :D

[ Start @ 1.0 GHz, Stock Voltage, Max @ 1.0 GHz ]
The File ==> LGE Stock Voltage Kernel Version 013 With EXT4 <==

[ Installation procedure: ]

1. reboot to CWM
2. Clear cache
3. install zip from SDcard
4. Reboot

DONE!

[ Bulletin: ]

Version 0.1.3 is out. Stock Gingerbread is NOW officially supported. Darkknight shall rise again!


[ Bugs: ]

None So far...


[ History: ]

Version 0.0.1 (deprecated)

Added FakeShmoo OC/UV
Added MinMax Governor (not used)
Governor switched back to performance due to some issues
Undervolted -50mv across the board by default
Lowest CPU Freq is now 400 MHz instead of 300 MHz, voltage remain the same
Default to 1100 MHz as startup frequency.
Added new 1500 MHz frequency
Made Performance Governor Default (supposedly Tegra has HW scaler)
Compiled with Tegra2 specific VFP optimizations :D
Compiled with even MORE Tegra2 specific optimizations :D

Version 0.0.2 (deprecated)

Added BFS-Like tweaks CFS Scheduler
Added BFQ I/O Scheduler
Added SLQB memory allocator
Added EXT4 support :D
Added CIFS + UTF-8 support :D

Version 0.0.3 (deprecated)

Added TUN/TAP support directly

Version 0.0.4 (Short Term Release)

The File ==> LGE OC/UV Kernel Version 0.0.4 <==
The File ==> LGE OC/UV Kernel Version 0.0.4 With EXT4 <==
The File ==> LGE Stock Voltage Kernel Version 0.0.4 <==
The File ==> LGE Stock Voltage Kernel Version 0.0.4 With EXT4 <==

Added AVP overclock
Overclock SDRAM from 300 to 333
Adjusted Voltage tables for UV and SV
Adjusted frequency tables for UV and SV
Reduced memory carve out from 128MB to 64 MB

Version 0.0.5 (Current, FR)

The File ==> LGE OC/UV Kernel Version 0.0.5 <==
The File ==> LGE OC/UV Kernel Version 0.0.5 With EXT4 <==
The File ==> LGE Stock Voltage Kernel Version 0.0.5 <==
The File ==> LGE Stock Voltage Kernel Version 0.0.5 With EXT4 <==

Enabled Voodoo Sound processing :D

Version 0.0.6 (deprecated, GB)

Initial GB Release
Fixed LGE coding errors
EXT3 versions are NO LONGER supported
Based on latest V21e Official LGE GB source code
Added Voodoo Sound Support
Added CIFS+UTF-8
Added EXT4 FS and mounted EXT4
Added TUN/TAP support
Added SLQB memory allocator
Added BFQ I/O scheduler
Used Tegra2 compiler optimization

Version 0.1.1 (Short Term Release, GB)

The File ==> LGE Stock Voltage Kernel Version 0.1.1 With EXT4 <==

Stock Voltage ONLY
Enabled Compressed RAM Swap (more efficient RAM management)
Revert Back to Froyo RAM Timing Parameters
Added more delays for clock updates
Disabled memory carveout killer
Disabled FakeShmoo OC and Peripheral OC (Blame LG)
Disabled Undervolting (Blame LG)


Version 0.1.2 (Short Term Release, GB)

The File ==> LGE Pre-OC/UV Kernel Version 0.1.2_2 With EXT4 <==
The File ==> LGE Stock Voltage Kernel Version 0.1.2 With EXT4 <==

Enabled FakeShmoo OC
Enabled Peripheral OC (AVP 280 MHz, SDRAM 333 MHz, GPU 350 MHz)
Enabled GPU Memory Carveout reclaim
Fixed Major Major LGE V21e FAILS!!!!
(no more SOD, Random Reboots, Freezes)


Version 0.1.3 (Current, GB)

Revert back to GB Touch driver adjustments
Revert back to GB Real-Time Clock (RTC) adjustments

Standard Disclaimer: Not responsible for bricking your phone, voiding your warranty, or any other pain or suffering you may feel as result of using this ROM or Kernel!!!

My github in Compliance with GPL :D
 
See less See more
6
#14 · (Edited by Moderator)
faux123 said:
EXT4 versions have /system /data and /cache mounted as ext4 but still retains the original ext3 format
SV stock voltage version is for those who experienced random crashes / bootloops using my UV/OC kernel.
Tried the ext4 UV/OC kernel with weapong2x today but was having lots of freezes where I had to remove battery to reboot. Usually the ext4 UV/OC kernels work good on my phone, so this is an exception. Just installed SV ext3 hoping for improvement. Either way great work as usual :) Thanks...
 
#15 · (Edited by Moderator)
"popsi said:
Tried the ext4 UV/OC kernel with weapong2x today but was having lots of freezes where I had to remove battery to reboot. Usually the ext4 UV/OC kernels work good on my phone, so this is an exception. Just installed SV ext3 hoping for improvement. Either way great work as usual :) Thanks...
Same issue, two reboots and a lockup. Having issue with SV kernel and not Ext4
 
#20 · (Edited by Moderator)
Just flashed the gb oc uv non ext4 running weaponx and so far so good. No bootloop no restarts yet but only been a few minutes.

What exactly does oc uv do? What are the pros and cons of uv? I've always used the sv on fauxs roms but decided to give oc uv a try this time.

UPDATE: infinite sleep and reboots on both oc uv AND sv ... had to nandroid back

Sent from my LG-P999 using Tapatalk
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top