[tanclo (OP)]

Rooting procedure

-- read Post 3

Finding Firmware
Check your device info from the dialer
*#1234# then find the correct firmware...
-- read Post #2

Recoveries and Kernels by Tegrak
A word here .. The recent two official updates (Android 4.0.3 and Android 4.0.4) where followed within 24 hours by new Tegrak Recoveries and Kernels for all three devices. The recovery keeps getting better and the kernel is as stable as the official one. This is a No Nonsense, rock solid product.
This developer deserves a big hand and a generous thank you!!

Donate to the development via this link http://pspmaster.tistory.com/31

Tegrak's latest recovery and kernel builds are posted on the Korean language blog here
http://pspmaster.tistory.com/176. It is virtually impossible to register at tistory atm (a division of Daum but blogging accounts are by invitation only). To comment or ask anything of tegrak, follow @tegrak on twitter.
In order to help you locate things on the Korean site I have listed the content which is currently available.

Scroll down to the bottom half of the page on pspmaster, and find the Bold Headings as listed below. There is a link below each heading which allows you to unfold/fold the previous builds.

PLEASE take care to check the Device code E120 followed by the S, K, or L
The first one here is for the E110S -- the SII LTE (not the SII HD device) --->
Look also at the last code before the .recovery.tar (in the case of the Odin PDA file)
or the .zip (in the case of the flashable zip for the kernel)
This is the FIRMWARE code. Match Device, and Firmware codes with the information found in Settings, About Phone on your Android.

SKT Galaxy S2 LTE (SHV-E110S) Latest ---
Tegrak-Kernel-Build-41-for-SHV-E110S-UH31.recovery.tar
Tegrak-Kernel-Build-41-for-SHV-E110S-UH31.zip
Previous --
Tegrak-Kernel-Build-39-for-SHV-E110S-UD25.recovery.tar
Tegrak-Kernel-Build-39-for-SHV-E110S-UD25.zip
Tegrak-Kernel-Build-39-for-SHV-E110S-UG06.recovery.tar
Tegrak-Kernel-Build-39-for-SHV-E110S-UG06.zip

SKT Galaxy S2 HD LTE (SHV-E120S) Latest ---
Tegrak-Kernel-Build-41-for-SHV-E120S-UH20.recovery.tar
Tegrak-Kernel-Build-41-for-SHV-E120S-UH20.zip

Previous ---
Tegrak-Kernel-Build-32-for-SHV-E120S-EL27.recovery.tar
Tegrak-Kernel-Build-32.1-for-SHV-E120S-EL27.zip
Tegrak-Kernel-Build-34-for-SHV-E120S-FB13.recovery.tar
Tegrak-Kernel-Build-34-for-SHV-E120S-FB13.zip
Tegrak-Kernel-Build-36-for-SHV-E120S-FC24.recovery.tar
Tegrak-Kernel-Build-36-for-SHV-E120S-FC24.zip
Tegrak-Kernel-Build-36-for-SHV-E120S-FD12.recovery.tar
Tegrak-Kernel-Build-36-for-SHV-E120S-FD12.zip
Tegrak-Kernel-Build-38-for-SHV-E120S-FD24.recovery.tar
Tegrak-Kernel-Build-38-for-SHV-E120S-FD24.zip
Tegrak-Kernel-Build-39-for-SHV-E120S-UE11.recovery.tar
Tegrak-Kernel-Build-39-for-SHV-E120S-UE11.zip
Tegrak-Kernel-Build-39-for-SHV-E120S-UG07.recovery.tar
Tegrak-Kernel-Build-39-for-SHV-E120S-UG07.zip

KT Galaxy S2 HD LTE (SHV-E120K) Latest ---
Tegrak-Kernel-Build-43-for-SHV-E120K-UK08.recovery.tar
Tegrak-Kernel-Build-43-for-SHV-E120K-UK08.zip

Previous ---
Tegrak-Kernel-Build-32-for-SHV-E120K-FA04.recovery.tar
Tegrak-Kernel-Build-32-for-SHV-E120K-FA04.zip
Tegrak-Kernel-Build-36-for-SHV-E120K-FC02.recovery.tar
Tegrak-Kernel-Build-36-for-SHV-E120K-FC02.zip
Tegrak-Kernel-Build-39-for-SHV-E120K-UE14.recovery.tar
Tegrak-Kernel-Build-39-for-SHV-E120K-UE14.zip
Tegrak-Kernel-Build-39-for-SHV-E120K-UF29.recovery.tar
Tegrak-Kernel-Build-39-for-SHV-E120K-UF29.zip

LGU + Galaxy S2 HD LTE (SHV-E120L) Latest ---
Tegrak-Kernel-Build-40-for-SHV-E120L-UG31.recovery.tar
Tegrak-Kernel-Build-40-for-SHV-E120L-UG31.zip
Previous ---
Tegrak-Kernel-Build-32-for-SHV-E120L-EL22.recovery.tar
Tegrak-Kernel-Build-32.1-for-SHV-E120L-EL22.zip
Tegrak-Kernel-Build-33-for-SHV-E120L-FB05.recovery.tar
Tegrak-Kernel-Build-33-for-SHV-E120L-FB05.zip
Tegrak-Kernel-Build-38-for-SHV-E120L-FD07.recovery.tar
Tegrak-Kernel-Build-38-for-SHV-E120L-FD07.zip
Tegrak-Kernel-Build-39-for-SHV-E120L-UE11.recovery.tar
Tegrak-Kernel-Build-39-for-SHV-E120L-UE11.zip
Tegrak-Kernel-Build-39-for-SHV-E120L-UF11.recovery.tar
Tegrak-Kernel-Build-39-for-SHV-E120L-UF11.zip

You can download everything directly from here
http://pspmaster.tistory.com/176

Subscribe to Tegrak's RSS feed to be notified of new recoveries/kernel builds

General Information, Forums

This device variant is officially sold in Korea but has shown up elsewhere in Asia as well. There is a custom ROM by Teamleader available at koxda
The custom ROM solves an SMS limitation found on the Korean official firmware

Other useful forums
-->!!!!!!!!!!!! BBS GFAn SII HD LTE Forums !!!!!!!!!!!!
---> KOXDA
--> Whirlpool samsung general and Telstra threads
-->> bvlgarian updates from korea about some android stuff
-->> (Russian) Samsung Firmware 4PDA

Edited by tanclo, 02 December 2012 - 11:49 PM.

[tanclo (OP)]

Firmware collection:
Since buying this phone, I have collected links to firmware
You will find here in this post, links to original posts:

1. Highly recommended - Stable S3 UI custom ROM by anluoxi a.k.a "madman"
2. Unstable CM10-based Android 4.1.2 Jellybean by Leesl0416
[Linux 3.0.49|JB.4.1] Kernel by Leesl0416
Leesl0416 kernel distribution is TERMINATED
3. CM9 by liu2729863
4. Paranoid Android PA2.99 -- E120L
5. MIUI V4.1.2 for -- E120L
6. Unroot: Stock Firmware, grabbed from Kies
7. Pre-rooted stock: customised ROMS fix SMS issues etc
8. Many Custom ROMs http://bbs.gfan.com/...518040-1-1.html

------------------------------------------------------------
E120K ONLY by Anluoxi a.k.a "madman"
Stock UF29 with SIII UI -- Android 4.0.4 Build UF29
This highly recommended ROM is a beautiful piece of work!
It merges the S3 UI with the S2 HD LTE UI

Languages: English, Korean, Traditional and Simplified Chinese
Long SMS and accessories include some roaming zip as well

If you are on Stock ROM follow the rooting procedures here
Enter Tegrak recovery - Do System and Data backup
Then wipe (factory reset) data, wipe cache, wipe dalvik cache
Make sure about updates by going to the developers's thread here

Find the LATEST download address and save anluoxi929.zip
Unzip anluoxi2012.9.29.tar to your PC
2012-12-23 Direct download address:

http://pan.baidu.com/share/link?shareid=67473&uk=2938235010

Open Odin and choose PDA then navigate to anluoxi2012.9.29.tar
Put the Device in Download mode (how to) -- Hit "Start" on the Odin program

Allow the device to reboot

Go to Tegraks site:-

http://pspmaster.tistory.com/m/post/view/id/176

Find "Tegrak-Kernel-Build-39-for-SHV-E120K-UF29.recovery.tar" download it, save to PC
Find "Tegrak-Kernel-Build-39-for-SHV-E120K-UF29.zip" download it and save it to the Phone
(Hint: create the folder:- /tegrak/update and save it there)

Put the Device in Download mode again (how to)

Flash Tegrak-Kernel-Build-39-for-SHV-E120K-UF29.recovery.tar from Odin
Allow to reboot

Now enter the phone Recovery Mode (how to)
Flash the zip Tegrak-Kernel-Build-39-for-SHV-E120K-UF29.zip
Reboot

Enter recovery again:- Restore your data

From the App drawer: Open the superuser app and update the su binary

There are added features you can flash from zips provided on the main thread
Please check the thread for updates

[/size]
[size=5]http://bbs.gfan.com/android-5093221-1-1.html

(before doing this, you may want to backup your system in case you want to revert)
Available:- 15 customisable Toggles + status bar transparency
Find the zip files 15-toggles.t-929 (preferred) or R-929.zip (more features)
Save those to /tegrak/update/ and flash them from recovery
Direct download address for 15-toggles.t-929.zip (2012-12-23)

http://pan.baidu.com/share/link?shareid=146446&uk=2938235010

Enjoy
------------------------------------------------------------
CM9 by Dev: Liu2729863

http://bbs.gfan.com/android-5471246-1-1.html

Device: SHV-E120L
------------------------------------------------------------

CM10 Jellybean - RC1 Stable
Posted on: 2012-11-20
Device: SHV-E120K
Built from source CyanogenMod 10 Stable
Kernel: Linux 3.0.43 Stable CyanogenMod
Platform: Android 4.1.2 (JZO54K)
Latest ROM: cm-10-20121117-UNOFFICIAL-dalikt (cm-10.0.0-RC1-dalikt)
All credit for the development to LEESL0416

Please read the WARNINGS, Change Log and Instructions at the original links before proceeding

Please read the share and use limitations requested by the developers

Find the Original Korean blog posts with links to ROM, Recovery and GAPPS

Latest ROM -- cm-10-20121117-UNOFFICIAL-dalikt.zip (cm10.0.0-RC1)
here

http://blog.naver.com/leesl0416/40172808629

Previous ROM -- cm10-20121027-UNOFFICIAL-dalikt.zip
here

http://blog.naver.com/leesl0416/40171663305

Custom Kernels for E120K, E120L, E120S and E160K
Governors:
smartassv2, lazy, lagfree, badass, lulzactiveq, intellidemand, pegasusq, scary, aggressive, gallimaufry, wheatly
Schedulers:
noop, deadline, sio, vr, cfq
Find the kernels devloped by LeeSL0416at her original post here
Check the top right hand corner of the Leesl0416 blog post to find a small green arrow - click the arrow to access the downloadable attachments

Share, use and distribution limitations (requested by the ROM developers)
Breach any of these requests, and the developers will no longer share their work:

Do not upload the work to another site

Do not distribute the work without giving credit

Do NOT "cook" or "port" the ROM (without consulting devs)

You might try to contact the developer via the blog leesl0416 or leesl0416 Cyanogenmod Profile

The developers bear no responsibility for any damage
or loss incurred as a result of using the Recovery or ROM

.........................
I report my own experience - and my own understanding of the Korean post

Not Working:
Video Calls and DMB (TV)
Developer Option: Strict Mode cannot be disabled - as a result, a red border flashing will indicate a 'slow or stubborn' process.
This doesn't indicate a fault with the phone and is an intended option in all ROMS (including stock ROMS). In this ROM, it can't be disabled.
High-definition video playback errors occur
Screen rotation problem occurs rarely
Error when playing videos: suggested workaround - try SW decoding

I tested this and found that VOIP calls over SIP are not working in cm10-20121117-UNOFFICIAL-dalikt (RC1)
This issue appears on certain builds of CM10 - SIP calls are dropped - the connection to server is interrupted
If you use a VOIP SipPhone (Zoiper, CSipSimple, Sipdroid, or the native Android Internet Phone),
you should use the older version cm10-20121027-UNOFFICIAL-dalikt.zip
You can fix the gyroscope (rotation) issues in the older version extracting from the latest ROM
and pushing into the older ROM the following files

/system/lib/libakm.so

and

/system/lib/hw/sensor.default.so

(thanks to leesl0416 for this advice)

Downloads
1. CM-10.0.0-RC1-dalikt Stable ROM (cm-10-20121117-UNOFFICIAL-dalikt.zip)
(USE -->> cm10-20121027-UNOFFICIAL-dalikt.zip <--- for stable SIP calls)
- Save the zip filename: cm-10.0.0-RC1-dalikt.zip to the internal storage [download/ folder] of the Phone

2. CWM-based Recovery
- Save this tar filename: cwm-recovery-6.0.1.5-SHV-E120K.tar to your PC

3. Download GAPPS CyanogenMod 10.0 http://goo.im/gapps
- save the zip filename: gapps-jb-20121011-signed.zip to the internal storage [download/ folder] of the Phone


Flashing
1. Open Odin as described in Post 3 below
Select PDA in Odin and navigate to, then select

cwm-recovery-6.0.1.5-SHV-E120K.tar

!! MAKE SURE YOU HAVE SELECTED ONLY THIS TAR FILE !!

2. Put your device in Download mode and plug it in to the PC.
When Odin shows connected (yellow COM icon), hit Start
Wait for the device to reboot

!! - Do not interrupt this process -!!

3. Power the phone off.
Gently and Securely grasp the phone so that your thumbs can press both volume buttons at the same time
Now use your index finger to press the Power button .......

[Volume up] and [Volume Down] and [Power]

As soon as you see "Samsung" appear!! release the Power Button ONLY
Continue holding the Volume Buttons until you enter CWM Recovery

Recovery Navigation and Selection of options
To navigate, use the volume buttons (up/down)
Or use the Menu touch button (Down) and the home button (Up)
The power button to select!

Wipe user data
Press the Home button FIVE times - [wipe data/factory reset] -
Press the Power button to select
Press the Home Button FIVE times - [delete all user data]
Press the Power button to select
Complete ......
Go down to the last option [Go Back]
Use the Power button to select

Wipe cache
- [wipe cache partition]

Wipe dalvik cache
- [advanced] - [wipe dalvik cache]

Flash ROM
- [install zip from sdcard]
- [install zip from internal sdcard]
- [download/]
- cm-10.0.0-RC1-dalikt.zip
Complete

Flash gapps
- [install zip from sdcard]
- [install zip from internal sdcard]
- [download/]
- gapps-jb-20121011-signed.zip

Go back,
- [reboot system now]

Enjoy CyanogenMod10 on your Galaxy S2 HD LTE



----------------------------------------------------------------------------------
MIUI v4.1.2 for the E120L

Read the thread here

----------------------------------------------------------------------------------
PA 2.99 for E120L

Read the thread here
----------------------------------------------------------------------------------'
Official + Stock-based customised Firmware - stored at Kingsoft Disk ( kuaipan.cn )

Use this link when you register and help me gain storage capacity

If you don't read Chinese, I suggest using Chrome and/or download How TO use Kaiupan PDF for help at Kingsoft Kuaipan.cn storage site.

SHV-E120K Android 4.0.4 (15-11-2012) -- SHV-E120K.UK08 Official Not rooted

SHV-E120K Android 4.0.4 (15-11-2012) -- SHV-E120K.UK08 Rooted Chinese language + SMS fixed (Dev: anluoxi "Madman")

SHV-E120K Android 4.0.4 (12-07-2012) -- SHV-E120K.UF29 - based custom Beautiful S3 UI + SMS fixes etc - Rooted

SHV-E120K Android 4.0.4 (12-07-2012) -- SHV-E120K.UF29 Official Not rooted

SHV-E120S Android 4.0.4 -- SHV-E120S.UH20 Official Not Rooted (posted by Hwang at Daum &amp;tistory)

SHV-E120S Android 4.0.4 -- SHV-E120S.UH20 ROOTED (posted by Hwang at Daum &amp; Tistory)

SHV-E120S Android 4.0.3 (24-05-2012) -- SHV-E120S.UE11 Official Not rooted

SHV-E120L Android 4.0.3 (24-05-2012) -- SHV-E120L.UE11 Official Not rooted

SHV-E120K Android 4.0.3 (24-05-2012) -- SHV-E120K.UE14 Official Not rooted

SHV-E120K Gingerbread (final) -- SHV-E120K.FCO2 Official Not rooted

SHV-E120K Gingerbread (oldest) -- SHV-E120K.FA04 Official Not rooted

---------------------------------------------------------------------------------
Use this link when you register and help me gain storage capacity


If you don't read Chinese, I suggest using Chrome and/or download [size=5]How TO use Kaiupan PDF for help at Kingsoft Kuaipan.cn storage site.
---------------------------------------------------------------------------------

Other places you might find Official firmware

GFAN Threads tagged "SGSII HD LTE"

Various Gingerbread ROMS at 97yoonho.tistory.com:
SHV-E120S.EL27 SHV-E120S.FB13

HOME_E120K.FA04.1705_CL866070_REV03_user_low_ship.tar

HOME_E120L.FB05.0938_CL939741_REV00_user_low_ship.tar.md5

SHV-E120L.EL22

Edited by tanclo, 22 December 2012 - 09:42 PM.

[tanclo (OP)]

ROOTING procedure
Thanks to a26196030
1. Install the stock firmware (gingerbread or ICS) Via Kies or download it and flash with Odin
2. Find out your device/firmware in the About Phone section (Settings/about phone)
Or enter *#12343# from your dialer
Then get the latest Tegrak build which matches exactly your firmware. Find the recoveries and kernels (and Odin software) here AT pspmaster.tistory
If you haven't installed Odin yet, do so now.
If you are on Linux, then run Odin in Virtual Box.

REMEMBER TO download and flash the correct recovery for your device-FIRMWARE
If your Device is SHV-E120K firmware E120K.UE14... and you use the recovery
"Build-36-for-SHV-E120L-Recovery.tar ---- then I'm afraid your phone may well be rendered inoperable
Exercise common sense and read and check the details when you download the tar and zip as well as when you flash it in Odin

Save the Tegrak.-Recovery.tar to your PC

Save the Tegrak-Kernel.zip to SDCARD/tegrak/update

Download SU.Busybox.Installer.zip posted in the thread here AT bbs.gfan. Or get it from here - At the Link, Go to File, Crtl+s (Download the ZIP .. NOT separate parts of the zip)
(Thanks to the poster at bb.gfan for the zip)

Save this to your phone sdcard/tegrak/update

3. If you have adb working already, it's easiest to engage your phone to download mode using adb command:
turn phone on - set to USB DEBUGGING mode (Gingerbread: settings/applications/development - in ICS: settings/developer options/)
comnect USB cable from phone to pc, open a terminal and enter ::
"adb reboot download"
- if for some reason you can't use ADB ->>
power the phone off then press and hold VOL DOWN + HOME + PWR buttons simultaneously until the warning screen displays
(Hit volume up at that screen if necessary) this engages Download mode. "Odin mode" should be shown in red at the top

3. Open Odin on your PC (Run it inside VirtualBox on a Linux Computer) - connect the phone to pc - Odin will show successful connection with a yellow block displaying the port number.

4. Click PDA and browse and select the recovery.tar which you have saved on the PC.
*** Double check now that you have the correct recovery to match your device model (E120K - E120S - E120L) This is probably the most important match you should be sure about!! ***
*** The firmware indicated on the recovery tar file name should also match the firmware on your device.
After making sure
Click the Start on Odin and wait ....... ..

DO NOT DISCONNECT PHONE &amp; PC
DON'T PULL BATTERY no matter what! It's safer to reboot the pc if things hang at this stage, but don't risk losing your download mode. Resolve any problems via forums first. Odin will reboot the phone after flashing is completed

5. After automatically rebooting
Open a terminal, type..
adb reboot recovery
Or , power down the phone.
Press and hold VOLUME UP + VOLUME DOWN + POWER
Samsung name displays, release only the power button for a second, the press it again.. Hold it until recovery mode is engaged

6. Use Volume up /down to move then Press Home or power to select ..
Install zip from sdcard. Select Tegrak-Kernel-Build-39-for-SHV-E120K-UE14.zip

Be sure you have selected the kernel that matches the recovery which you flashed in step 4 above.
match the recovery and kernel correctly
for example, if your device is SHV-E120K and you have firmware UE14 (check about phone)
"Build-39-for-SHV-E120K-UE14-Recovery.tar with Tegrak-kernel-Build-39-for-SHV-E120K-UE14.zip" -- correctly matched
"Build-39-for-SHV-E120K-UE14-Recovery.tar with Tegrak-kernel-Build-32-for-SHV-E120K.FA04.zip" -- mismatched

7. Go back in the recovery, move up or down to select the SU.Busybox.installer.zip
Reboot...

7. Open Chainfire's Superuser application and update your binary .. do it a few times until Root permissions are granted automatically. I prefer Chainfire's newer SuperSU app. To switch to this newer interface, download it from Google Play. Open it and update the binary again. You don't need to uninstall superuser. SuperSU will now take over the interface for the SU binary. The Pro version promised a few more features like Survival mode - but I have found the feature didn't work during this update. Mobile Odin is still in development - the Galaxy HD isn't supported at this time. Support the project by buying the Pro version and sending a dump file to the developer.

You should definitely Install - Tegrak Kernel or Kernel+ ... This gives you easier access to recovery and download mode + some other very useful features. Without this developer's work, we would be fishmeal, so do consider supporting with a donation now and again.

You might also install the Busybox installer from Google play then update busybox.

There is some issue with the latest ICS official recovery.. You might see some errors appearing about a png missing. You will also find moving down to make selections in recovery don't work correctly. I've noticed that though the screen doesn't show your cursor has actuality moved.. When pressing volume down, the cursor moves once down to position 2, the second volume down press will not display but the cursor is really on position 3 and actually ready to perform the action. One has to perform blindly here.. Pressing the power button will actually perform the action. Give it a try. All should go well as long as you take precautions.

You now have Root access

Good luck!

Edited by tanclo, 25 November 2012 - 09:34 PM.

[Somator]

how about pcode + pda/csc/modem to get the latest from fus ?

[tanclo (OP)]

-omator, on 18 May 2012 - 01:50 PM, said:

how about pcode + pda/csc/modem to get the latest from fus ?

I would like to do that.. I'm on Ubuntu .. Heimdall won't recognize my device so Printing a PIT won't work that way
What is the other way to obtain those resources? I'm standing by :-) and thank you

[Yatin]

tanclo, on 18 May 2012 - 01:39 PM, said:

I picked up the notice here
And the link provided takes me to this blog post here by "freedom to the fly"

this is tegrak latest recovery build 36
download directly from here
http://pspmaster.tis...ost/view/id/176

alternatively,

Recovery and corresponding kernels for the L, S and K variants are listed
Solutions are downloadable after registering here
This is not a 'CM recovery' version -- It's described as a solution developed for the E120

The recovery provided will enable backup/restore of system/data etc
Flashing zip from the card also possible.

To flash .. take the recovery and flash with odin
enter recovery mode and flash the kernel zip
Flashing the wrong recovery to your device or mixing the recovery for your device with the kernel for another!

please be warned and Read the warnings and more instructions at the links provided.

After testing, please report back for our information, failing which, I myself will report on Monday afternoon (UTC)

Other useful resources and discussion here

tanclo, on 18 May 2012 - 01:39 PM, said:

I picked up the notice here
And the link provided takes me to this blog post here by "freedom to the fly"

this is tegrak latest recovery build 36
download directly from here
http://pspmaster.tis...ost/view/id/176

alternatively,

Recovery and corresponding kernels for the L, S and K variants are listed
Solutions are downloadable after registering here
This is not a 'CM recovery' version -- It's described as a solution developed for the E120

The recovery provided will enable backup/restore of system/data etc
Flashing zip from the card also possible.

To flash .. take the recovery and flash with odin
enter recovery mode and flash the kernel zip
Flashing the wrong recovery to your device or mixing the recovery for your device with the kernel for another!

please be warned and Read the warnings and more instructions at the links provided.

After testing, please report back for our information, failing which, I myself will report on Monday afternoon (UTC)

Other useful resources and discussion here

Thank you kindly for sharing this with us! We now have working recovery and a custom kernel. I have followed your procedure and installation went off smoothly.

You can view the screen shots of the recovery here http://minus.com/mPfHif8Y5/1g

Thank you once again :)

Edited by Yatin, 19 May 2012 - 02:25 AM.

[tanclo (OP)]

Yatin, on 19 May 2012 - 02:20 AM, said:

Thank you kindly for sharing this with us! We now have working recovery and a custom kernel. I have followed your procedure and installation went off smoothly.

You can view the screen shots of the recovery here http://minus.com/mPfHif8Y5/1g

Thank you once again :)

Glad it worked out. I merely stumbled on it and didn't even know it was Tegraks' latest builds. There are a few donate application options on the market by Tegrak who is tirelessly developing for Samsung devices. Will take a look at which one I can use myself and then hit donate :)

Thanks for being the guinea pig, Yatin and thanks for the screenshots!!

Sent from my SHV-E120K using Tapatalk 2

[Somator]

tanclo, on 18 May 2012 - 02:59 PM, said:

I would like to do that.. I'm on Ubuntu .. Heimdall won't recognize my device so Printing a PIT won't work that way
What is the other way to obtain those resources? I'm standing by :-) and thank you

PCode = *2767*4387264636#

PDA/PHONE/CSC = *#1234#

[tanclo (OP)]

-omator, on 20 May 2012 - 12:39 PM, said:

PCode = *2767*4387264636#

PDA/PHONE/CSC = *#1234#

sorry - I'm a bit lost now :-)
How does this code help us? I assumed it was something I could do to help you but thank you in advance.

EDIT: I suppose latest firmware is available via a tool called "fus" -- there is a thread on xda here -
I shall have to check to see if the Korean Variants are available on there via the non-paid version of fus.

Edited by tanclo, 25 May 2012 - 01:24 PM.

[tanclo (OP)]

Post deleted
-- information about rooting ICS incorporated into original post #1 ---

Edited by tanclo, 25 May 2012 - 02:29 PM.