These are signed, so you can flash them even with S-ON as long as it is a newer version than you actually have, (ex. You can't flash the 2.3.3 over 2.3.4 unless you already have S-OFF).
These are flashed in the bootloader, NOT RECOVERY! Rename the file to PG32IMG.zip and go into the bootloader. It should auto-detect the file and ask you if you want to install it.
Original Froyo 2.2.1 Firmware (this is what the device shipped with): http://jellybellys.minus.com/mvivow#3
Device: HTC Incredible 2 RUU Version: 1.34.605.4 Radio Version: 0.99.01.0255 Android Version: 2.2.1 Signed: Yes md5sum: 30cb90e5c7c5f5ecb8a618fbbbdea06d Other Notes: This is the stock froyo firmware that came shipped on the device.
Gingerbread 2.3.3 Firmware (this is what you want if you want S-OFF via Revolutionary): http://jellybellys.minus.com/mvivow#2
Device: HTC Incredible 2 RUU Version: 2.18.605.3 Radio Version: 1.09.01.0622 Android Version: 2.3.3 Signed: Yes md5sum: cea499f51b40055ffd118960e1e73255
Gingerbread 2.3.4 Firmware (Comes with hboot .98, latest version): http://jellybellys.minus.com/mvivow#1
Device: HTC Incredible 2 RUU Version: 5.10.605.9 Radio Version: 1.09.01.1111 Android Version: 2.3.4 Signed: Yes md5sum: 7a3e4cb260cb4534d4c1166197d685e5
You should always check the md5sum before flashing... just in case!
If you are looking to revert back to stock for a warranty replacement, I reccomend using this thread to do it .
And to our friendly neighborhood moderator: Sticky?
Edited by jellybellys, 10 April 2012 - 10:36 AM.